In nearly all situations, most people spend quite a bit of money purchasing their lift truck. Therefore, it is extremely important to take good care of it so as to protect your investment well into the long run. It is a great idea to know the procedures which are undertaken during maintaining and taking care of this machinery.
By starting up the forklift and listening carefully how it runs is among the best ways to tell how good the engine is performing. For example, if there are any knocks or misses, the machinery is faulty and this must raise several issues. In addition listen closely for any squealing sounds that come from the belts because these sounds would provide you with a lot of information.
Some of the main parts requiring attention during maintenance include the safety warning devices, gauges, horn, the overhead guard and the lights. Any faulty components or burnt out light bulbs must be replaced as soon as they are noticed. It is also essential to inspect the wiring.
The battery compartment terminals must be cleaned when the above parts have been inspected carefully. If the terminals are not clean, be sure to clean them well. Each cell of the battery must be checked so as to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the equipment and then change the filters. The fuel filters, hydraulic filter and the transmission filter must be replaced regularly. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
After the oil change is done and the filters have been replaced, a visual inspection of the drive axle has to be performed. If there is a grease fitting on the axle make certain to apply some grease. Check the belts on the engine for any frays or cracks. If you find any, fix the problem accordingly. Afterwards, inspect each and every other component of the machine like the wheels. If any kind of concern or fault is detected, be certain to address it immediately so as to make certain the machinery is working at its safest and optimum levels.