When utilizing rough terrain scissor lifts, it is vital to utilize extra caution and be completely aware of your surroundings so as to maintain safety. The extended booms on the machine act as levers from the drive unit's center. Like for instance, a 6 inch bump can lead to a 3 foot bounce when the driver is at the driver controls. Take into account all other traffic nearby, because they may not be aware that you are moving. Plan your assent carefully. Park the boom lift on a flat surface that has no water or mud. These areas cover deep potholes that can be probably cause the occupants to fall if the tires fell into the holes. If provided, utilize all of the outriggers, extended to their full extension position. Be certain to only use approved wooden chalk blocks.
Lots of lifts work from a metal platform on the end of the boom. The long booms act as levers from the drive unit's center. A 6-inch bump can result in a 3-foot bounce while you are at the driver controls. Be aware of all other traffic. They might not know that you are moving. Plan your assent. Park the boom lift on a flat surface free of any mud or water. These areas can cover deep potholes in which the lift tires could fall, tipping the occupants. Extend all outriggers, if provided, to the full extension position. Place only approved wooden chalk blocks underneath the outrigger pads in order to prevent the unit from moving.
Overhead power lines are a serious danger for lift drivers regardless of what lift is being utilized. Like for instance, if the platform operator is not being aware, or if the platform is being controlled by personnel on the ground which is not able to accurately access proximity to wiring and therefore, either the platform itself or the worker could be easily brought into contact with electrical wires. The employee might be electrocuted unfortunately unless correctly insulated.