Used Cushion Tire Forklift Salem - Most forklifts are classified by the kind of work they do and some are classified by their type of tires. There are two main kinds of tire classification for forklifts, pneumatic and cushion tire.
It is vital to note that there are benefits and drawbacks to both types of forklift tires; cushion and pneumatic. The drawbacks and benefits of cushion tire models can be only compared when the drawbacks and benefits of the pneumatic tires are also discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires are made up of either smooth or treaded solid rubber and are designed around a metal ring or baseband. Cushion tires cost less to make and are easier to take care of. Cushion tires are designed for smooth surface applications such as work that takes place mostly indoors or around loading docks. Cushion tires are also better suited to applications in tight spaces. This is because they offer a turning radius that allows for movement around tight corners. Cushion tires enable the forklift to be situated closer to the ground, increasing the vertical clearance in comparison to other models that rely on pneumatic tires. It is important to note that cushion tires do not offer as much traction compared to pneumatic models and this is noticeable on wet locations and outdoor surfaces.
Cushion tire forklifts are used for a wide range of applications, including order picking, unloading shipments, organizing inventory, transporting to and from a loading dock and other similar applications.
Pneumatic Tires
Pneumatic tires have two categorizations as either solid resilient pneumatic or standard air pneumatic. They are popular for rough terrain applications and uneven surfaces.
The difference between these two pneumatic categories is that the first is made entirely of rubber, while the latter is a layered rubber, filled with air.
Pneumatic tire forklifts are excellent choices for working in locations with uneven or unpaved ground outdoors. The solid resilient pneumatic forklift tires are best used in areas such as lumber yards or junkyards and construction sites where there may be sharp metal items on the ground which could puncture the tires.
Benefits of Cushion Tire Forklifts
Forklifts fitted with cushion tires are a good option for operation on smooth surfaces, both indoor and outdoor. The type of forklift that utilizes cushion tires are for mainly inside applications with some limited outside use. Cushion tire forklifts are commonly used in warehouses and manufacturing plants. Warehousing and narrow aisles and tight locations all rely on the benefits of cushion tire forklifts.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Most cushion tire forklifts intended for indoor use are electric, which means they are usually smaller and more maneuverable because they do not required the extra room needed to accommodate the larger internal combustion engine.
2) Lower Clearance
Forklifts built for indoor use with cushion tires generally have a lower clearance than pneumatic tire equipment, allowing the forklift to more easily navigate doorways and other obstacles such as lights and sprinkler systems.
3) Durability
Cushion tires for forklifts are durable, easy to maintain and have little to no risk of puncture.
4) Quiet
Because the majority of cushion tire forklifts are powered by battery or fuel cell, instead of an internal combustion engine, they are much less noisy than propane or diesel powered forklifts.
5) Environmentally Friendly
Powered by electricity instead of relying on an internal combustion engine enables cushion tire forklifts to make zero dangerous emissions.
Forklift Tire Choice
The forklift frame typically depicts whether a cushion tire or a pneumatic tire will be utilized. The forklifts’ lifting capacity and frame are specific to the axles and tires in the design. The majority of forklift manufacturers create models to coincide with specific wheels and tires, usually cushion tires or pneumatic tires. Instead of trying to modify the forklift by picking the correct tire for a particular application, it is wiser to choose the forklift that will best suit the job at hand.
Workplace Applications
Suitable Work Applications for Cushion Tires
Cushion tire forklifts are popular for a variety of job sites. If there is moderate use of the forklift outside on smooth surfaces and the majority of the lifting, loading and transporting will be occurring inside on smooth floors, a cushion tire model is an excellent tool.
Forklifts fitted with cushion tires often have a smaller frame and sit much lower to the ground than forklifts fitted with pneumatic tires. This gives them better clearance for fitting through doorways and avoiding overhead obstacles. However, cushion tire forklifts also have less clearance to the ground which can result in cushion tire forklifts getting easily hung up on outdoor obstacles where the surface is not cleared or even. To combat this issue, the cushion tire forklift can be fitted with traction tires on the front. Tires that offer traction will perform better on wet surfaces, rough terrain, packed gravel and asphalt. Traction tires are not used on dirt or grass locations and need to be installed on opposite sides, the drive and steer axles.
One of the largest advantages of using a forklift with cushion tires is the smaller turning radius. Their ability to work in compact locations makes cushion tire forklifts excellent for warehousing and manufacturing operations. Areas that are designed with narrow aisles such as warehouse facilities will enjoy the tighter turning radius offered with cushion tire forklift models. Cushion tire forklifts are more cost-effective and available compared to pneumatic tire models.
Suitable Work Applications for Pneumatic Tire Forklifts
Outdoor applications working on gravel benefit from pneumatic tire forklift models thanks to the air in their tires. Some interior locations may utilize pneumatic tire forklifts; however, they do not offer a small turning radius or the lower clearance and maneuverability that the cushion tires provide. Of course, they are often powered by internal combustion engine so do produce harmful emissions which are not recommended for normal indoor use. With a wider base and longer frame in comparison to cushion tire models, pneumatic tire forklifts are for use mainly outdoors.
Of the two types of pneumatic tires, the solid pneumatic tire is more expensive than the air pneumatic tire. The solid pneumatic tire is comprised of solid rubber without any air inside, making this type more resilient against gouges or punctures. Outdoor areas including lumber yards and scrap yards that feature copious amounts of metal debris and nails often rely on solid pneumatic tires. Air-filled pneumatic tires work well on gravel and asphalt exterior surfaces. The main issue with air pneumatic tires is their ability to become gouged or punctured. Due to their susceptibility for getting gouged or punctured, the work location must be free from sharp debris before driving the air pneumatic tires. Air tires are also known to give a bouncy ride, contributing to operator discomfort and fatigue. Therefore, many air pneumatic tire forklift users prefer to foam fill their tires. Much less bouncy than air-filled pneumatic tires, the solid pneumatic forklift tires provide the operator with a smoother ride. Flat tires can be filled with foam to keep them more durable and prevent flats. It is necessary to plan for enough time when foam filling an air pneumatic tire as it can take up to 3 days to fill and cure properly.
Difference in Load Capacity
The load capacity on for pneumatic tire forklifts and cushion tire forklifts are fairly equal. Lift limits are given for certain electric-powered cushion tire forklifts. There are numerous forklifts available and a variety of pneumatic and cushion tire models can be found in a variety of load capacities. Load capacities come in a wide range - from less than 2,000 pounds to more than 200,000 pounds.
Cushion Tire Forklift PDF
